Belkin OmniView F1DP116G Instrukcja Użytkownika Pobierz pdf (Strona 56)

Using the Switch from a Remote Console

Video Configuration and Settings

Refresh

You may need to refresh the video image when changing the display attributes of

a target server.

To refresh the video settings:

1. In the quick-access toolbar, click .

2. Select “Refresh” or press “Crl+R”.

Manual Video Adjust

You may want to manually adjust video to fine-tune the target-server video

settings, to adapt to a noisy environment or a non-standard VGA signal, or when

using a full-screen DOS/CLI mode.

To adjust the video manually:

1. In the quick-access toolbar, click .

2. Select “Manual video adjust”. A slider bar will appear (see Fig. 18). A red

frame will also appear around the screen. This represents the screen area

according to the server’s screen resolution.

3. Move the sliders to adjust and change the displayed image. Click in the

area of the sliders for fine-tuning.

• Brightness/Contrast— adjusts the brightness and contrast of the

displayed image

• Horizontal Offset—

defines the starting position of each line on the

displayed image

• Vertical Offset—

defines the vertical starting position of the

display image

• Phase—

defines the point at which each pixel is sampled

• Noise Level— represents the video noise when a static screen

is displayed

• Automated Adjust—

when this box is checked, the video adjusts

automatically whenever there is a change in the screen resolution.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 83 84

Brak uwag

Belkin OmniView F1DP116G Instrukcja Użytkownika Strona 56