Belkin F5D52314 - Cable/DSL Gateway Router Instrukcja Użytkownika Pobierz pdf (Strona 3)

Description of Operation

The LANCNC-FAD acts as an FTP server for file storage that in turn can be accessed by

a Fadal CNC. Connection to the FTP server can be done with standard software tools that

are provided with most PC’s. A logon is not required as the LANCNC FTP server

accepts anonymous logins. Special software is not required. The most popular of these

are Explorer and Internet Explorer from Microsoft. Anyone on the network can drag and

drop files to the CNC server where they can be transferred to machine memory or drip

fed (DNC). Conversely, files residing in CNC memory can be sent to the data server

where they can be accessed by anyone on the network.

File information is stored on an SD card resident on the LANCNC-FAD. A 1 GB or

greater SD card is provided as standard. Other sizes may be substituted. In the event of a

network outage, the SD card may be removed and inserted into a PC. Files can be added

or stored at the PC and replaced in the LANCNC-FAD.

Note: Files should follow the 8.3 format for proper operation. E.g. File name should not

exceed 8 characters and the suffix should not exceed 3 characters.

The operator interface to the data server on the CNC side is done on the pendant of the

Fadal CNC. Special ‘+’ commands are used to active the data server on the CNC side.

The correct CD,# must be used for proper operation.

The CNC command CD,8 sets a baud rate of 9600 to the LANCNC-FAD.

The CNC command CD,10 sets a baud rate of 38400 to the LANCNC-FAD.

The CNC command CD,11 sets a baud rate of 57600 to the LANCNC-FAD.

(The above assumes that the version of Fadal control supports the baud rates listed.)

Once a CD command is entered, a LANCNC-FAD plus command may be used. A plus

command activates the LANCNC-FAD device and allows it to take control of the CNC

machine. When the command is finished, the LANCNC-FAD will issue a BYE command

to the machine. Another CD,# will be needed before another plus command can be sent

to the LANCNC-FAD device. The following demonstrates the order of operation to

execute a LANCNC-FAD command:

1. Enter the CD, Change Device, command for the LANCNC-FAD connected to

machine (example: CD,10 CD,11 or CD,8).

2. Type in the LANCNC-FAD command desired, ending the entry with a + sign and

not a carriage return (enter key).

3. Wait for command to be processed (a couple of seconds if a SD card has just

inserted).

4. Command is finished after the BYE command.

- 3 -

1 2 3 4 5 6 7 8 ... 21 22

Brak uwag

Belkin F5D52314 - Cable/DSL Gateway Router Instrukcja Użytkownika Strona 3