Belkin F1DB104P - OmniView E Series KVM Switch Instrukcja Użytkownika Pobierz pdf (Strona 18)

The mouse is lost when I switch to a different port.

• Checkthatthemouseyouareusingisconnectedproperlytotheconsole

port of the KVM Switch.

• Tightenanyloosecableconnections.

• Ifyouareusingamousedriverthatwasincludedwithyourmouse,uninstall

it and install the standard Microsoft mouse driver.

• Makesurethemouseworkswhendirectlypluggedintothecomputer.

• Ifthecomputeriscomingoutofstandbymode,allowuptooneminuteto

regain mouse function.

• De-activatepower-managementschemesonthePCwithwhichyouare

experiencing problems.

• IfyouhotswappedorchangedyourKVMconfiguration,makesure

you power off all attached computers. Then, reinstall the KVM Switch as

described on pages 8-10 of this manual.

• Tryadifferentmouse.

The mouse is not detected at boot up.

• Checkthecablesandmakesurethattheyareinsertedcorrectly.

The computer boots up, but the mouse does not work.

• Makesurethemouseispluggedinproperly.

• Makesurethemouseworkswhendirectlypluggedintothecomputer.

Rebooting may be necessary when trying this.

• Tryadifferentmouse.

• Trybootingtheproblemcomputerwhiletheportisselectedandwaituntil

the operating system loads before switching to another computer.

The computer boots up, but the mouse does not work.

• IfyouhotswappedorchangedyourKVMconfiguration,makesure

you power off all attached computers. Then, reinstall the KVM Switch as

described on pages 8-10 of this manual.

• Makesureyoudonothavemorethanonemousedriverinstalled.Make

sure that the driver is either for a standard PS/2 or USB mouse, or a PS/2

mouse compatible with Microsoft.

• Makesureyoudonothaveanymousedriversloadedinyour“CONFIG.

SYS” or “AUTOEXEC.BAT” files.

• Avoidmovingthemouseorpressingthemousebuttonwhenswitching

ports on the KVM Switch.

• Trybootingtheproblemcomputerwhiletheportisselectedandwaituntil

the operating system loads before switching to another computer.

Troubleshooting

1 2 ... 13 14 15 16 17 18 19 20 21 22

Brak uwag

Belkin F1DB104P - OmniView E Series KVM Switch Instrukcja Użytkownika Strona 18