Belkin OmniViewIP 5000HQ Instrukcja Użytkownika Pobierz pdf (Strona 43)

OmniView IP 5000 HQ

SECTIONS

Table of Contents

1 3 5 7 9 11 13 15 17 192 4 6 8 10 12

20 21

MANAGEMENT

8.5 KVM Ports tab

In the “KVM Ports” tab, you:

• AssociatetheKVMswitchesinthesystemtotherelevantIPdevice.

• AssociatetargetswiththerelevantIPdevice/portnumberonthe

KVM switch.

Click the “KVM Ports” tab, the following appears.

Figure 55 Configuring KVM over IP – KVM Ports tab

The KVM switch drop-down list consists of pre-selected KVM switches.

You must select all the KVM switch types physically connected to the

system; this is done in the “Settings” part of the menu and is explained

in the “KVM switches” section on page 52. Select the KVM switch model

(if any) physically connected to this IP device. The number of ports in the

selected KVM switch appears in the “Ports” section.

Notes:

When using an OmniView 5216/32K Switch, “Internal” is selected by default

and cannot be altered.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 108 109

Brak uwag

Belkin OmniViewIP 5000HQ Instrukcja Użytkownika Strona 43